Fuel-injector replacement planning for a 2006–2009 Mitsubishi Raider 3.7L V6 starts with the cause of rough running, hard starting or an injector-circuit fault such as P0201. A circuit code does not prove that an injector is clogged, and a rough-running engine does not automatically need a complete set. Confirm the engine and diagnosis before selecting parts.
Scope: naturally aspirated 3.7L gasoline V6 part selection and service preparation. This is not a bolt-by-bolt installation procedure. The 4.7L V8 is outside this selection, and shared catalog coverage with a Dodge or Jeep does not establish identical access or tightening specifications.
Experienced fuel-system work. Electrical diagnosis may need a qualified technician.
Reserve a half-day or longer after diagnosis and arrange alternative transport. This is a scheduling allowance, not factory labor time.
Current matched-injector price, required seals and any damaged retention parts; tools and testing are additional.
Diagnosis · Fitment · Materials · Tools · Preparation · Cost

Circuit fault or delivery problem?
Save codes and freeze-frame information before clearing memory. Record when the problem occurs: cold start, hot restart, idle or acceleration. Keep the scan report with the repair notes rather than relying on the wording of a dashboard warning.
The 2008 Raider 3.7L factory P0201 diagnostic identifies the cylinder-one injector circuit. Its checks distinguish the injector from wiring, connector contact, ASD power supply and control-circuit faults. It also warns against probing PCM terminals without the specified diagnostic adapter. Do not replace the injector solely because its name appears in the code description.
- Circuit evidence: have the correct electrical tests performed; damaged wires or poor terminals need their own repair.
- Delivery or leakage evidence: arrange controlled fuel-system testing rather than judging flow by an audible click.
- Misfire without a confirmed injector fault: investigate ignition, intake leakage and mechanical condition as well as fuel delivery.
What a replacement can address: a proven injector defect. It cannot repair a damaged harness, a failed ignition component or low compression. Buying a multi-piece package is a purchasing decision, not evidence that every injector has failed.
Manufacturer fitment and the submitted listing
The manufacturer selection reference is A-Premium APFI182, cataloged as six gasoline multi-port injectors with two blade terminals. Its interchange references include 53032701AA, FJ474 and Bosch 0280158020. These identify a candidate replacement; the actual VIN and installed injector still need matching.
Compare the exact offer before ordering
Submitted Amazon listing: ASIN B0BQWC6VC9. Confirm with the seller that the selected offer supplies the six-piece APFI182-equivalent set and the correct seals. Check retaining-clip contents separately; do not assume that every photographed accessory is supplied.
Compare connector keying, overall length, seal seats and the original reference. Two terminals or a similar body color alone do not establish interchangeability.
Read HowToMechanic’s affiliate disclosure.
Review the injector listing and package
Retailer: Amazon
| Vehicle | Catalog years |
|---|---|
| Mitsubishi Raider | 2006–2009 |
| Dodge Dakota / Durango / Nitro / Ram 1500 | 2004–2010 / 2004–2009 / 2007–2011 / 2004–2010, respectively |
| Jeep Commander / Grand Cherokee / Liberty | 2006–2010 / 2005–2010 / 2004–2012, respectively |
| Ram 1500 / Dakota | 2011–2012 / 2011, respectively |
3.7L V6 only for the applications above. These are APFI182 catalog ranges, not a universal installation guide or confirmation of the current Amazon offer. The manufacturer catalog is the source of this table. Verify the exact vehicle before purchasing.
A. Parts and materials to prepare
Do the package comparison before disabling the truck. Resolve missing materials while the vehicle can still be moved safely, and keep old part identification available for the supplier.
- Injector quantity: match the diagnosed repair, not merely the number in the package.
- Sealing parts: arrange the correct new upper and lower injector seals for each disturbed injector. Confirm their dimensions and fuel compatibility against the replacement manufacturer’s requirements; a generic O-ring assortment is not a verified substitute.
- Retaining hardware: identify the correct injector clips and supply-connection locks. Obtain replacements for damaged or missing pieces and any items the exact service procedure makes non-reusable.
- Clean engine oil: the 2007 Raider rail instructions specify a light oil film on injector O-rings during seating. Only a small quantity is needed; a new jug is unnecessary when suitable clean oil is available.
- Cleanliness supplies: fuel-compatible caps, lint-free wiping materials, absorbents and an approved collection container. Keep debris out of open rail passages and injector bores.
A damaged rail or crossover is not repaired by tightening mounting bolts harder. The 2007 Raider rail description warns against separating its connected halves, kinking the crossover or adding clamps to it.
B. Reusable tools and safety equipment
These examples identify specific products, not a claim that a general tool kit completes every year’s procedure. Reuse suitable equipment already owned. Check fastener profile, access space and required torque range against the exact vehicle instructions.
Metric hand tools
DEWALT DWMT45425, 142-piece SAE/metric set, 1/4- and 3/8-inch drives. It provides reusable ratchets, sockets and extensions for matching fasteners. Drive size is not bolt-head size. Select the socket that fits fully, and do not use impact tools to compensate for poor access.
View the mechanics tool set · Retailer: Amazon
Chemical-splash goggles
3M 91252H1-DC-10, clear lens with adjustable strap. Use correctly fitting splash protection around fuel connections and cleanup. Add gloves selected using their manufacturer’s gasoline-resistance and exposure guidance; cloth work gloves are not a liquid-fuel barrier.
View the chemical-splash goggles · Retailer: Amazon
Accessible extinguisher
First Alert HOME1, red one-pack, rated 1-A:10-B:C. Keep a serviceable extinguisher near a clear exit and know its use. Its presence is not permission to work around leaking fuel, sparks or an ignition source.
View the fire extinguisher · Retailer: Amazon
C. Conditional or optional equipment
Fuel-line disconnect tools — confirm connector first
Lisle 37000, six sizes from 5/16 through 7/8 inch. The manufacturer lists several automotive quick-connect applications. Select a sleeve only when the installed connector’s service instructions call for it. This set is not a verified universal release method for every Raider fitting; never force a sleeve into a push-button or tab-operated connector.
View the disconnect-tool set · Retailer: Amazon
Basic diagnostic reader — optional
ANCEL AD310, black wired OBD-II reader. Use it to save supported engine codes and freeze-frame information when another reader is unavailable. It is not offered as an injector-flow tester or a replacement for manufacturer-level actuation and circuit-testing equipment.
View the basic code reader · Retailer: Amazon
Arrange an appropriate calibrated torque wrench after obtaining the actual fastener specifications. A wrench’s advertised range is not a vehicle torque value. Any fuel-pressure gauge needs the correct adapter, hoses, pressure rating and controlled fuel-collection arrangement; an unverified universal kit is not automatically complete.
Prepare the job before opening the fuel system
- Document the complaint and testing. Decide whether the evidence supports an injector repair, a circuit repair or further diagnosis.
- Match and inspect the delivered parts. Compare labels, connectors, seals and retention features while the truck is still assembled. Resolve any discrepancy with the supplier.
- Obtain the complete year-specific procedure. Read pressure release, coupling release, access removal, injector retention, required replacement items, tightening values and final tests together. Do not combine isolated steps from different engines.
- Organize the workspace. Plan cooling time, clean component storage, safe fuel handling and a place to keep removed hardware identified.
- Arrange verification equipment. Confirm the engine-off leak-check method and any required scan functions before disassembly. Do not assume a basic code reader can command the fuel system.
The 2007 4WD 3.7L rail service excerpt describes coil removal, a four-bolt rail and careful seating of the injectors. It sends the reader to a separate torque specification. Those details help identify the work involved; they do not supply a complete procedure for all four model years.
Do not start a repair with a missing pressure-release method or guessed mounting torque. A qualified workshop is the appropriate choice when the full instructions or equipment are unavailable, the rail or connector is damaged, or diagnosis remains uncertain.
DIY versus shop cost comparison
Use a written estimate for the actual vehicle and injector quantity. The following is a comparison method, not current retailer pricing or a factory labor allowance.
- DIY with suitable tools: matched injector cost plus seals, retention parts, consumables and any outside diagnostic testing.
- DIY buying equipment: add the actual price of missing hand tools, torque equipment and fuel-safe test equipment. Those reusable purchases should be separated from consumed repair parts.
- Illustrative shop labor: an assumed three hours at an assumed $150 per hour equals $450 labor, before parts, diagnosis, taxes or additional repairs. Neither assumption is a quoted rate or service-manual labor time.
Ask whether the estimate covers one injector or a complete set, what testing justified replacement, which seals and clips are supplied, and whether leak testing is included. Also establish the shop’s policy on customer-supplied components before purchasing them.
Questions and mistakes to avoid
Does this selection include the 4.7L V8?
No. Keep the 3.7L V6 application separate. Do not order by the Raider badge or by connector pin count alone.
Must all six be replaced?
Not automatically. Diagnosis determines the repair. A complete package can be convenient, but it does not prove every injector is defective.
Can the connected rail halves be separated for easier access?
The cited Raider rail instructions prohibit separating their crossover connection or adding clamps. Protect the assembly from bending and kinking.
What should be checked before accepting the truck after repair?
Ask for confirmation that the connections and retainers are secure, the fuel system passes its leak checks, and the original complaint has been retested. A code-clear operation alone is not evidence of a successful repair.
Sources and related help
The linked service excerpts reproduce manufacturer information. This is research-based selection and preparation guidance, not a claim of hands-on testing.
- A-Premium APFI182 catalog: manufacturer identity, references and vehicle ranges.
- 2008 Raider 3.7L injector-circuit diagnostic.
- 2007 Raider rail construction and crossover precautions and the linked service excerpt above.
- DEWALT tool-set specifications · Lisle 37000 specifications.
- 3M splash-goggle information · First Alert HOME1 information · ANCEL AD310 functions.
- Fuel-system repair guide directory · Mitsubishi Raider discussion room.
Share
2006–2009 Mitsubishi Raider 3.7L Fuel Injector Replacement Planning — HowToMechanic
Link and QR card
For your shop, classroom, club, or car meet. Share only where invitations are welcome.